Filter
Top Products
B-2
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with the Flash File System
No more than one user at a time can manage the software images and configuration files for a switch
stack.
These sections contain this configuration information:
• Displaying Available File Systems, page B-2
• Setting the Default File System, page B-3
• Displaying Information about Files on a File System, page B-3
• Changing Directories and Displaying the Working Directory, page B-4
• Creating and Removing Directories, page B-5
• Copying Files, page B-5
• Deleting Files, page B-6
• Creating, Displaying, and Extracting Files, page B-6
Displaying Available File Systems
To display the available file systems on your switch, use the show file systems privileged EXEC
command as shown in this example for a stacking-capable switch. In this example, the stack master is
stack member 2; therefore
flash2: is aliased to flash:. The file system on stack member 5 is displayed
as
flash5 on the stack master.
Switch# show file systems
File Systems:
Size(b) Free(b) Type Flags Prefixes
- - opaque ro bs:
* 57409536 25664000 flash rw flash: flash2:
- - opaque rw system:
524288 512375 nvram rw nvram:
- - opaque ro xmodem:
- - opaque ro ymodem:
- - opaque rw null:
- - opaque ro tar:
- - network rw tftp:
- - network rw rcp:
- - network rw http:
- - network rw ftp:
- - opaque ro cns:
57409536 27306496 flash rw flash5:
Table B-1 show file systems Field Descriptions
Field Value
Size(b) Amount of memory in the file system in bytes.
Free(b) Amount of free memory in the file system in bytes.