Filter
Top Products
Contents
vii
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
Configuring NTP Broadcast Service 6-6
Configuring NTP Access Restrictions 6-8
Configuring the Source IP Address for NTP Packets 6-10
Displaying the NTP Configuration 6-11
Configuring Time and Date Manually 6-11
Setting the System Clock 6-11
Displaying the Time and Date Configuration 6-12
Configuring the Time Zone 6-12
Configuring Summer Time (Daylight Saving Time) 6-13
Configuring a System Name and Prompt 6-14
Default System Name and Prompt Configuration 6-15
Configuring a System Name 6-15
Understanding DNS 6-15
Default DNS Configuration 6-16
Setting Up DNS 6-16
Displaying the DNS Configuration 6-17
Creating a Banner 6-17
Default Banner Configuration 6-17
Configuring a Message-of-the-Day Login Banner 6-18
Configuring a Login Banner 6-18
Managing the MAC Address Table 6-19
Building the Address Table 6-20
MAC Addresses and VLANs 6-20
MAC Addresses and Switch Stacks 6-20
Default MAC Address Table Configuration 6-21
Changing the Address Aging Time 6-21
Removing Dynamic Address Entries 6-22
Configuring MAC Address Notification Traps 6-22
Adding and Removing Static Address Entries 6-24
Configuring Unicast MAC Address Filtering 6-25
Displaying Address Table Entries 6-26
Managing the ARP Table 6-26
CHAPTER
7 Configuring Switch-Based Authentication 7-1
Preventing Unauthorized Access to Your Switch 7-1
Protecting Access to Privileged EXEC Commands 7-2
Default Password and Privilege Level Configuration 7-2
Setting or Changing a Static Enable Password 7-3
Protecting Enable and Enable Secret Passwords with Encryption 7-3