Filter
Top Products
Index
IN-41
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
SNMP (continued)
in-band management 1-6
informs
and trap keyword 32-11
described 32-5
differences from traps 32-5
disabling 32-15
enabling 32-14
limiting access by TFTP servers 32-15
limiting system log messages to NMS 31-10
manager functions 1-5, 32-3
MIBs
location of A-4
supported A-1
notifications 32-5
overview 32-1, 32-4
security levels 32-3
status, displaying 32-17
system contact and location 32-15
trap manager, configuring 32-13
traps
described 32-3, 32-5
differences from informs 32-5
disabling 32-15
enabling 32-11
enabling MAC address notification 6-22
overview 32-1, 32-4
types of 32-11
users 32-6, 32-9
versions supported 32-2
SNMPv1 32-2
SNMPv2C 32-2
SNMPv3 32-2
snooping, IGMP 23-2
software compatibility
See stacks, switch
software images
location in flash B-25
recovery procedures 47-2
scheduling reloads 3-23
tar file format, described B-25
See also downloading and uploading
source addresses
in IPv4 ACLs 34-12
in IPv6 ACLs 35-6
source-and-destination-IP address based forwarding,
EtherChannel
37-8
source-and-destination MAC address forwarding,
EtherChannel
37-8
source-IP address based forwarding, EtherChannel 37-8
source-MAC address forwarding, EtherChannel 37-7
SPAN
and stack changes 29-10
configuration guidelines 29-11
default configuration 29-11
destination ports 29-8
displaying status 29-23
interaction with other features 29-9
monitored ports 29-6
monitoring ports 29-8
overview 1-13, 29-1
ports, restrictions 25-11
received traffic 29-5
session limits 29-11
sessions
configuring ingress forwarding 29-15, 29-22
creating 29-12
defined 29-4
limiting source traffic to specific VLANs 29-15
removing destination (monitoring) ports 29-13
specifying monitored ports 29-12
with ingress traffic enabled 29-14
source ports 29-6
transmitted traffic 29-6
VLAN-based 29-7