Filter
Top Products
Index
IN-22
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
IP unicast routing (continued)
disabling 38-20
dynamic routing 38-4
enabling 38-20
EtherChannel Layer 3 interface 38-6
IGP 38-31
inter-VLAN 38-3
IP addressing
classes 38-8
configuring 38-6
IPv6 39-4
IRDP 38-14
Layer 3 interfaces 38-6
MAC address and IP address 38-10
passive interfaces 38-97
protocols
distance-vector 38-4
dynamic 38-4
link-state 38-4
proxy ARP 38-11
redistribution 38-89
reverse address resolution 38-10
routed ports 38-6
static routing 38-4
steps to configure 38-6
subnet mask 38-8
subnet zero 38-8
supernet 38-9
UDP 38-17
unicast reverse path forwarding 1-13, 38-85
with SVIs 38-6
See also BGP
See also EIGRP
See also OSPF
See also RIP
IPv4 ACLs
applying to interfaces 34-20
extended, creating 34-11
named 34-15
standard, creating 34-10
IPv4 and IPv6
configuring on an interface 39-18
differences 39-2
dual protocol stacks 39-7
IPv6
ACLs
displaying 35-9
limitations 35-3
matching criteria 35-3
port 35-2
precedence 35-3
router 35-2
address formats 39-3
advantages 39-3
and switch stacks 39-12
applications 39-7
assigning address 39-16
autoconfiguration 39-6
autogenerated address 39-7
CEFv6 39-20
configuring static routes 39-21
default configuration 39-15
defined 39-1
enabling 39-16
Enhanced Interior Gateway Routing Protocol (EIGRP)
IPv6
described 39-8
EIGRP IPv6 commands 39-9
passive interfaces 39-9
prefix lists 39-9
router ID 39-9
feature limitations 39-12
features not supported 39-11
ICMP 39-5