Filter
Top Products
Index
IN-29
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
MVR
and address aliasing 23-20
and IGMPv3 23-21
configuration guidelines 23-20
configuring interfaces 23-22
default configuration 23-20
described 23-18
example application 23-18
in the switch stack 23-20
modes 23-21
monitoring 23-24
multicast television application 23-18
setting global parameters 23-21
support for 1-5
N
NAC
AAA down policy 1-10
critical authentication 9-15, 9-37
IEEE 802.1x authentication using a RADIUS
server
9-41
IEEE 802.1x validation using RADIUS server 9-41
inaccessible authentication bypass 1-10, 9-37
Layer 2 IEEE 802.1x validation 1-10, 9-41
Layer 2 IP validation 1-10
named IPv4 ACLs 34-15
named IPv6 ACLs 35-3
NameSpace Mapper
See NSM
native VLAN
and IEEE 802.1Q tunneling 16-4
configuring 12-24
default 12-24
neighbor discovery, IPv6 39-5
neighbor discovery/recovery, EIGRP 38-42
neighbors, BGP 38-64
Network Admission Control
See NAC
Network Assistant
benefits 1-3
described 1-5
downloading image files 1-3
guide mode 1-3
management options 1-3
managing switch stacks 5-2, 5-17
upgrading a switch B-24
wizards 1-3
network configuration examples
data center 1-18
expanded data center 1-18
increasing network performance 1-17
providing network services 1-17
small to medium-sized network 1-19
network design
performance 1-17
services 1-17
network management
CDP 26-1
RMON 30-1
SNMP 32-1
network performance, measuring with IP SLAs 41-3
network policy TLV 27-6
Network Time Protocol
See NTP
no commands 2-4
nonhierarchical policy maps
configuration guidelines 36-32
configuring 36-48
described 36-9
non-IP traffic filtering 34-27
nontrunking mode 12-18
normal-range VLANs 12-4
configuration guidelines 12-6
configuration modes 12-7
configuring 12-4
defined 12-1
no switchport command 10-4