Filter
Top Products
38-48
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
Chapter 38 Configuring IP Unicast Routing
Configuring EIGRP
Use the no forms of these commands to disable the feature or to return the setting to the default value.
Monitoring and Maintaining EIGRP
You can delete neighbors from the neighbor table. You can also display various EIGRP routing statistics.
Table 38-9 lists the privileged EXEC commands for deleting neighbors and displaying statistics. For
explanations of fields in the resulting display, see the Cisco IOS IP Command Reference, Volume 2 of 3:
Routing Protocols, Release 12.2.
Step 9
accept-lifetime start-time {infinite | end-time | duration
seconds}
(Optional) Specify the time period during which the key
can be received.
The start-time and end-time syntax can be either
hh:mm:ss Month date year or hh:mm:ss date Month
year. The default is forever with the default start-time
and the earliest acceptable date as January 1, 1993. The
default end-time and duration is infinite.
Step 10
send-lifetime start-time {infinite | end-time | duration
seconds}
(Optional) Specify the time period during which the key
can be sent.
The start-time and end-time syntax can be either
hh:mm:ss Month date year or hh:mm:ss date Month
year. The default is forever with the default start-time
and the earliest acceptable date as January 1, 1993. The
default end-time and duration is infinite.
Step 11
end Return to privileged EXEC mode.
Step 12
show key chain Display authentication key information.
Step 13
copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Table 38-9 IP EIGRP Clear and Show Commands
Command Purpose
clear ip eigrp neighbors [if-address | interface] Delete neighbors from the neighbor table.
show ip eigrp interface [interface] [as number] Display information about interfaces configured for EIGRP.
show ip eigrp neighbors [type-number] Display EIGRP discovered neighbors.
show ip eigrp topology [autonomous-system-number] |
[[ip-address] mask]]
Display the EIGRP topology table for a given process.
show ip eigrp traffic [autonomous-system-number] Display the number of packets sent and received for all or a
specified EIGRP process.