Cisco Systems AS5350XM Network Card User Manual


 
1-3
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Chapter 1 Safety Warnings, Recommendations, and Tools Required
Preventing Electrostatic Discharge
Preventing Electrostatic Discharge
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs
when electronic components are improperly handled and can result in complete or intermittent failures.
Always follow ESD-prevention procedures when you remove and replace components. Ensure that the
chassis is electrically connected to earth ground. Wear an ESD-preventive wrist strap, ensuring that it
makes good skin contact. Connect the grounding clip to an unpainted surface of the chassis frame to
safely ground unwanted ESD voltages. To guard against ESD damage and shocks, the wrist strap and
cord must operate properly. If no wrist strap is available, ground yourself by touching the metal part of
the chassis.
For safety, periodically check the resistance value of the antistatic strap, which should be between 1 and
10 megohm (Mohm).
Required Tools and Equipment
The following items are provided with each universal gateway:
RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)
RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL)
RJ-45-to-DB-25 male DCE adapter (labeled MODEM)
RJ-45-to-RJ-45 rollover console cable
ESD-preventive wrist strap
Nylon cable tie
Cable tie holder
Grounding lug
Alarm connector
You might need the following equipment, which is not provided with the universal gateway:
Straight-through RJ-45-to-RJ-45 cable for an Ethernet connection
Ethernet hub or PC with a network interface card for Ethernet LAN connections
One breakout cable consisting of a 36-pin connector connected to eight RJ-45 adapters for CT1 or
CE1 connections
Straight-through RJ-45-to-RJ-45 cable for CT1 or CE1 connections
75-ohm coaxial cable for a CT3 connection
PC that is running terminal emulation software for local administrative access
Modem for remote administrative access
ESD-preventive mat
Blank feature card panel