Filter
Top Products
6-8
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Chapter 6 Voice Feature Card
Replacing PVDM2 Modules in the Voice Feature Card
Figure 6-11 Tightening the Captive Screws on the Cisco AS5350XM Universal Gateway
Figure 6-12 Tightening the Captive Screws on the Cisco AS5400XM Universal Gateway
Step 6
Check the OK/MAINT LED to verify that the card is working properly. For information about the voice
feature card LED, see the “LEDs” section on page 7-1.
Note To use the voice feature card, at least one voice feature card must be present when the universal
gateway is powered on. More voice feature cards can be inserted later. See the “Restrictions for
the Voice Feature Card” section on page 6-2 for more information.
Replacing PVDM2 Modules in the Voice Feature Card
The voice feature card contains six 80-pin SIMM sockets for PVDM2 modules, numbered 0 through 5.
(See Figure 6-13.) Each socket can be filled with a single 80-pin PVDM2 module.
Note The voice feature card supports a 64-channel PVDM2 (AS5X-PVDM2-64) module.
36818
Carrier card
DFC
Chassis
Captive
screw
Captive
screw
37202
Captive
screw
Captive
screw