Filter
Top Products
5-2
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Chapter 5 Universal Port and Dial-Only Feature Cards
Overview
Figure 5-1 Universal Port or Dial-Only Feature Card
Note The versions of the universal port and dial-only feature cards are identified on the card faceplate. The
universal port feature card faceplates are labeled NP-60 or NP-108, depending on the number of calls
supported. The dial-only feature card faceplates are labeled DL-60 or DL-108, depending on the number
of calls supported.
Restrictions for the Universal Port and Dial-Only Feature Cards
If a dial-only feature card is installed in a chassis with the universal port feature card, only the dial
services are supported. Table 5-1 describes the behavior of the Cisco AS5350XM and Cisco AS5400XM
universal gateways with dial-only feature cards, universal port feature cards, or both types of cards
installed in the chassis.
Caution We do not recommend deploying dial-only feature cards in a chassis that supports voice and fax services,
because voice or fax calls assigned to the dial-only feature card will fail.
Note For information about mixing voice feature cards with the universal port and dial-only feature cards, see
the “Restrictions for the Voice Feature Card” section on page 6-2.
31634
Table 5-1 Features Supported on Universal Port and Dial-Only Feature Cards
Feature Cards Installed Services Supported
Only dial-only feature cards installed Dial services
Only universal port feature cards installed Dial, voice, and fax services
Both universal port and dial-only feature cards
installed
Dial services