Filter
Top Products
2-9
Cisco MDS 9100 Series Hardware Installation Guide
OL-16187-01
Chapter 2 Installing the Cisco MDS 9100 Series
Installing the Switch in a Cabinet or Rack
Step 5 Insert the switch into the rack:
a. By using both hands, position the switch with the back of the switch between the front
rack-mounting rails as shown in Figure 2-4. If you are using the notched rails, for the
Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch, see Figure 2-5.
b. Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide
the C brackets onto the slider rails, and then gently slide the switch all the way into the rack. If the
switch does not slide easily, try realigning the C brackets on the slider rails.
Figure 2-4 Sliding the Cisco MDS 9100 Series onto the Slider Rails
91632