Filter
Top Products
2-32
Cisco MDS 9100 Series Hardware Installation Guide
OL-16187-01
Chapter 2 Installing the Cisco MDS 9100 Series
Removing and Installing Components
Installing a Fan Module
To install a new fan module, follow these steps:
Step 1 Position the fan module with the LED oriented away from the back of the switch. Figure 2-24 shows the
fan module for the Cisco MDS 9120 Switch and the Cisco MDS 9140 Switch. Figure 2-25 shows the fan
module for the Cisco MDS 9134 Switch.
Step 2 Slide the fan module into the switch until it clicks into place.
Figure 2-24 Cisco MDS 9100 Series Fan Module
Figure 2-25 shows the Cisco MDS 9134 fan module.
Figure 2-25 Cisco MDS 9134 Fan Module
94009
Fan module LED
184094