Filter
Top Products
Contents
v
Cisco MDS 9100 Series Hardware Installation Guide
OL-16187-01
Installing a Cable into an SFP Transceiver 3-7
Removing a Cable from an SFP Transceiver 3-8
Maintaining SFP Transceivers and Fiber-Optic Cables 3-9
APPENDIX
A Cabinet and Rack Installation A-1
Cabinet and Rack Requirements A-1
General Requirements for Cabinets and Racks A-1
Requirements Specific to Perforated Cabinets A-2
Reference Perforated Cabinet A-2
Requirements Specific to Solid-Walled Cabinets A-3
Requirements Specific to Standard Open Racks A-3
Requirements Specific to Telco Racks A-3
Cisco MDS 9000 Family Telco and EIA Shelf Bracket A-3
Rack-Mounting Guidelines A-4
Before Installing the Shelf Brackets A-5
Required Equipment A-5
Installing the Shelf Bracket Kit into a Two-Post Telco Rack A-5
Installing the Shelf Bracket Kit into a Four-Post EIA Rack A-7
Installing the Switch on the Shelf Brackets A-8
Removing the Shelf Bracket Kit (Optional) A-9
APPENDIX
B Technical Specifications B-1
Switch Specifications B-1
Power Specifications B-2
General Power Supply Specifications B-3
Power Supply Requirements and Heat Dissipation Specifications B-3
Connection Guidelines for AC-Powered Systems B-4
SFP Transceiver Specifications B-4
Cisco Fibre Channel SFP Transceivers B-4
General Specifications for Cisco Fibre Channel SFP Transceivers B-5
Environmental and Electrical Specifications for Cisco Fibre Channel SFP Transceivers B-6
Cisco Gigabit Ethernet/Fibre Channel Transceivers B-6
General Specifications for Cisco GE/FC SFP Transceivers B-6
Environmental and Electrical Specifications for Cisco GE/FC SFP Transceivers B-7
Cisco CWDM SFP Transceivers B-7
General Specifications for Cisco CWDM SFP Transceivers B-8
Environmental and Electrical Specifications for Cisco CWDM SFP Transceivers B-8
Optical Specifications for Cisco CWDM SFP Transceivers B-9
X2 Transceiver Specifications B-10