Filter
Top Products
2-11
Cisco MDS 9100 Series Hardware Installation Guide
OL-16187-01
Chapter 2 Installing the Cisco MDS 9100 Series
Installing the Switch in a Cabinet with Insufficient Front Clearance
Figure 2-6 Attaching the Switch to the Rack
Figure 2-7 Attaching the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch to the Rack
(Notched Rails)
Installing the Switch in a Cabinet with Insufficient Front
Clearance
This section describes how to use the rack-mount kit provided with the switch to install the Cisco MDS
9100 Series switch into a cabinet with insufficient front-facing clearance. The Cisco MDS 9100 Series
switch is installed rear-facing to provide adequate clearance for the fibre-optic cables. This cabinet meets
the requirements described in Appendix A, “Cabinet and Rack Requirements,” except the cabinet has
91633
182461