Filter
Top Products
B-6
Cisco MDS 9100 Series Hardware Installation Guide
OL-16187-01
Appendix B Technical Specifications
SFP Transceiver Specifications
Environmental and Electrical Specifications for Cisco Fibre Channel SFP Transceivers
Table B-9 provides the maximum environmental and electrical ratings for Cisco Fibre Channel SFP
transceivers.
Cisco Gigabit Ethernet/Fibre Channel Transceivers
Table B-10 lists the combination Gigabit Ethernet/Fibre Channel (GE/FC) SFP transceivers available
through Cisco Systems for the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch.
General Specifications for Cisco GE/FC SFP Transceivers
Table B-11 lists general specifications for Cisco combination Gigabit Ethernet/Fibre Channel SFP
transceivers.
Note The cable distances provided are for 2-Gbps.
1. Approximate; actual distance may vary depending on fiber quality and other factors.
Table B-9 Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP Transceivers
Parameter Symbol Min. Max. Unit
Storage temperature
1
1. Absolute maximum ratings are those values beyond which damage to the device may
occur if these limits are exceeded for other than a short period of time. See Reliability
Data Sheet for specific reliability performance.
T
S
-40 85 °C
Case temperature
1,
2
2. Functional performance is not intended, device reliability is not implied, and damage to
the device may occur over an extended period of time between absolute maximum ratings
and the recommended operating conditions.
T
C
070°C
Relative humidity
1,
RH 5 95 %
Module supply voltage
1,
V
CC
T,R 3.1 3.5 V
Table B-10 Cisco Gigabit Ethernet / Fibre Channel SFP Transceivers
Part Number Description Type
DS-SFP-FCGE-SW 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre
Channel–short wavelength SFP
Short wavelength
DS-SFP-FCGE-LW 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre
Channel–long wavelength SFP
Long wavelength
DS-SFP-GE-T 1-Gbps Ethernet SFP