Filter
Top Products
6-12
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter 6 Command Reference
Command Details
The port numbering pattern is important if you are configuring other UDP ports on either the Supervisor
or the MWAM processor.
Examples The following example illustrates the logging listen mwam command:
router(config)# logging listen mwam 4100
MWAM Processor: 2 3 4 5 6
Base UDP Port:
1
1. Must be in the range 4000-10000 and be a multiple of 100.
<40-100>00 <40-100>00 <40-100>00 <40-100>00 <40-100>00
Additional UDP Port: <40-100>02 <40-100>03 <40-100>04 <40-100>05 <40-100>06
Additional UDP Port: <40-100>12 <40-100>13 <40-100>14 <40-100>15 <40-100>16