Filter
Top Products
6-29
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter 6 Command Reference
Command Details
show version
To display information about the currently loaded software version along with hardware and device
information, use the show version command available at the PC complex (processor 1 on the MWAM).
show version
Syntax Description This command has no arguments or keywords.
Defaults There are no default behavior or values.
Command Modes PC command
Command History
Usage Guidelines The show version command from the PC displays information about the software version currently
running on the MWAM.
Note You must first establish a session to processor 1 (session slot command).
Examples The following example illustrates the show version command:
root@mwam-4# show version
SVCMWAM Image version 2.1(1.0)
Mon Feb 23 01:29:45 EST 2004
Copyright (c) 2002-2003, 2004 by cisco Systems, Inc.
All rights reserved.
AP software is c6svc-5mwam-g4js-bf21_10.123-7.T1
AP software is based upon Maintenance image version: 3.1(0.2)
IOS Software is svcmwam-g4js-mz.123-7.T1
5 Processor Configuration
Line Card Number :WS-SVC-MWAM-1
Number of Pentium-class Processors : 1
BIOS Vendor: Phoenix Technologies Ltd.
BIOS Version: 4.0-Rel 6.0.4
Total available memory: 500 MB
Size of compact flash: 122 MB
root@mwam-4#
Release Modification
12.(9)ZA This command was introduced.