Filter
Top Products
6-24
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter 6 Command Reference
Command Details
recover-ios
To set the configuration register to boot with a clean configuration, use the recover-ios command
available at the PC complex (processor 1 on the MWAM).
recover-ios complex_number
Syntax Description
Defaults There are no default behavior or values.
Command Modes PC command
Command History
Usage Guidelines Use this command when you want to recover from a lockout condition on an MWAM processor as
described in Recovering from MWAM Processor Lockout.
Note You must first establish a session to processor 1 (session slot command).
Examples The following example illustrates the recover-ios command on processor complex 2 of the MWAM in
slot 9:
root@mwam-9#recover-ios 2
processing -p
processing -c
Setting DHCP options for processor complex 2
Setting config-reg value to: 0x40
Base external MAC: "0003.FEAB.9FB6"
Internet Software Consortium DHCP Server V3.0.1rc6
Copyright 1995-2001 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Wrote 0 deleted host decls to leases file.
Wrote 0 new dynamic host decls to leases file.
Wrote 0 leases to leases file.
Listening on LPF/eth0/02:00:00:00:0f:00/128.0.1.0/24
Sending on LPF/eth0/02:00:00:00:0f:00/128.0.1.0/24
Listening on LPF/eth1/02:00:00:00:0f:10/128.0.2.0/24
Sending on LPF/eth1/02:00:00:00:0f:10/128.0.2.0/24
Sending on Socket/fallback/fallback-net
complex_number Specifies a complex (0, 1, 2, or all) on the MWAM.
Release Modification
12.2(9)ZA This command was introduced.