Filter
Top Products
6-28
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter 6 Command Reference
Command Details
show tech-support
To display general information about the MWAM and its processors when it reports a problem, use the
show tech-support command available at the PC complex (processor 1 on the MWAM).
show tech-support
Syntax Description This command has no arguments or keywords.
Defaults There are no default behavior or values.
Command Modes PC command
Command History
Usage Guidelines The show tech-support command from the PC displays the output of a number of show commands. The
show tech-support command is useful for collecting a large amount of information for troubleshooting
purposes. The output of this command can be provided to technical support representatives when
reporting a problem.
Note You must first establish a session to processor 1 (session slot command).
Examples The following example illustrates the show tech-support command:
root@mwam-4# show tech-support
-------------------------- show version --------------------------
SVCMWAM Image version 2.1(1.0)
Mon Feb 23 01:29:45 EST 2004
Copyright (c) 2002-2003, 2004 by cisco Systems, Inc.
All rights reserved.
~snipped~
Release Modification
12.(9)ZA This command was introduced.