Filter
Top Products
6-34
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter 6 Command Reference
Command Details
show mwam
To show MWAM Transation Look-aside Buffers (TLBs) and cache errors, use the show mwam
command in privileged EXEC mode.
show mwam
Syntax Description
Defaults There are no default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command can be used to provide information about TLBs and cache errors.
Examples The following examples illustrate the show mwam command:
mwam-7-2#show mwam
Slot Number: 7, Complex Number: 1, Global Session Number: 2
2 active cpu(s) in complex
Gi0/0 IDB: 0x235D978C, MAC address: 0005.9a38.3820
Gi0/1 IDB: 0x235F0BF8, MAC address: 0200.0000.0110, IP address: 128.0.1.2
Gi0/2 IDB: 0x23606778, MAC address: 0200.0000.0120
Network IO Interrupt Throttling:
throttle count=0, timer count=0
active=0, configured=0
netint usec=4000, netint mask usec=200
512k of L2 cache shared between CPU 0 and 1
TLB entries (49/64 used):
Virt Address range Phy Address range Attributes
0x10000000:0x101FFFFF 0x020000000:0x0201FFFFF CacheMode=2, RW, Valid
0x10200000:0x103FFFFF 0x020200000:0x0203FFFFF CacheMode=2, RW, Valid
0x20200000:0x203FFFFF 0x000200000:0x0003FFFFF CacheMode=5, RO, Valid
0x20400000:0x205FFFFF 0x000400000:0x0005FFFFF CacheMode=5, RO, Valid
0x20600000:0x207FFFFF 0x000600000:0x0007FFFFF CacheMode=5, RO, Valid
0x20800000:0x20FFFFFF 0x000800000:0x000FFFFFF CacheMode=5, RO, Valid
0x21000000:0x211FFFFF 0x001000000:0x0011FFFFF CacheMode=5, RO, Valid
0x21200000:0x213FFFFF 0x001200000:0x0013FFFFF CacheMode=5, RO, Valid
0x21400000:0x2147FFFF 0x001400000:0x00147FFFF CacheMode=5, RO, Valid
show mwam Displays MWAM TLBs and cache errors.
Release Modification
12.3(5a)B This command was introduced.