Filter
Top Products
6-18
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter 6 Command Reference
Command Details
Field descriptions for the output of this command are listed below:
Active Processor is operational and remote console/logging is active.
Online Processor is operational but remote console/logging is not active.
Note This state commonly occurs when a processor is not enabled by the
application running on the MWAM.
Inactive Processor is rest or resetting, and remote console/logging is inactive.
Proving The remote console connection is testing the IP path between the Supervisor
and MWAM processor before moving to the ACTIVE state. If there is a
configuration problem or VLAN mismatch, the connection may stay in Proving
state until the configuration issue is resolved.
ttynum Line number of the user with an active command on the processor. A value of
-1 indicates no user.
Logging Level Indicates the maximum severity level at which the Supervisor displays logger
messages from an MWAM.
timeouts Number of occurrences of remote command execution time-out.
logevents Number of logging events.
sequence errors Protocol sequence errors caused by overrun or time-out.
reset count Number of times the connection reset because of connection time-out or
MWAM processor reload.
KPA_missed Number of keepalives missed.
send seq Sequence number of remote commands sent.
tty recv seq Sequence number of remote command response messages received from the
MWAM processor.
log recv seq Sequence number of remote logging messages received from the MWAM
processor.
Current queue count Number of messages received at the Supervisor and queued to be processed
(logged/displayed).
IP addr IP address of the MWAM processor.
Note Typically, this is an internal address, but it can be a defined address,
such as the one shown in processor 6 (06/6) in the example. Use the
logging main-cpu command on the MWAM processor to define a
different IP address, if required.