Filter
Top Products
Chapter 4
Advanced Configuration
33
4-Port SSL/IPSec VPN Router
Source Select the Source IP address(es) for the access
rule. If it can be any IP address, select Any. If it is one IP
address, select Single and enter the IP address. If it is a
range of IP addresses, select Range, and enter the starting
and ending IP addresses in the Addr. Range Begin and Addr.
Range End fields. If the Source is all IP addresses, then enter
* in the Addr. Range Begin field.
Destination Select the Destination IP address(es) for the
access rule. If it can be any IP address, select Any. If it is
one IP address, select Single and enter the IP address. If
it is a range of IP addresses, select Range, and enter the
starting and ending IP addresses in the Addr. Range Begin
and Addr. Range End fields.
Scheduling
Apply this rule Decide when you want the access rule to
be enforced, and enter the hours and minutes in 24-hour
format. The default condition for any new rule is to always
enforce it.
Decide which days of the week you want the access rule to
be enforced, and select the appropriate days.
Click Save Settings to save your changes, or click Cancel
Changes to undo them. Click Return to return to the
Access Rules screen.
Firewall > Content Filter
Use this screen to block specific domains during the
designated days and times for specific devices.
Firewall > Content Filter
Content Filter
IP/MAC Group
You can apply the content filter to specific groups of
computers. You can have up to 10 groups, and each group
can have up to 50 computers.
To create a group of computers, click Add Group. The Add
Group screen appears.
Add Group