Filter
Top Products
DescriptionName
The preferred driver interrupt mode. This can be one of the following:
• MSIx—Message Signaled Interrupts (MSI) with the optional
extension. This is the recommended option.
• MSI—MSI only.
• INTx—PCI INTx interrupts.
Interrupt Mode drop-down list
Step 11
In the Fibre Channel Port area, review the information in the following fields:
DescriptionName
The number of I/O operations that can be pending in the vHBA at one
time.
Enter an integer between 1 and 1,024.
I/O Throttle Count field
The maximum number of LUNs that the driver will export. This is
usually an operating system platform limitation.
Enter an integer between 1 and 1,024. The recommended value is 1024.
LUNs per Target field
Step 12
In the Fibre Channel Port FLOGI area, review the information in the following fields:
DescriptionName
The number of times that the system tries to log in to the fabric after
the first failure.
To specify an unlimited number of retries, select the INFINITE radio
button. Otherwise select the second radio button and enter an integer
into the corresponding field.
FLOGI Retries field
The number of milliseconds that the system waits before it tries to log
in again.
Enter an integer between 1,000 and 255,000.
FLOGI Timeout field
Step 13
In the Fibre Channel Port PLOGI area, review the information in the following fields:
DescriptionName
The number of times that the system tries to log in to a port after the
first failure.
Enter an integer between 0 and 255.
PLOGI Retries field
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
10 OL-23489-08
Managing Network Adapters
Viewing vHBA Properties