Filter
Top Products
DescriptionName
The number of milliseconds that the system waits before it tries to log
in again.
Enter an integer between 1,000 and 255,000.
PLOGI Timeout field
Step 14
In the SCSI I/O area, review the information in the following fields:
DescriptionName
The number of SCSI I/O queue resources the system should allocate.
Enter an integer between 1 and 8.
CDB Transmit Queue Count
field
The number of descriptors in each SCSI I/O queue.
Enter an integer between 64 and 512.
CDB Work Queue Ring Size field
Step 15
In the Receive/Transmit Queues area, review the information in the following fields:
DescriptionName
The number of descriptors in each transmit queue.
Enter an integer between 64 and 128.
FC Work Queue Ring Size field
The number of descriptors in each receive queue.
Enter an integer between 64 and 128.
FC Receive Queue Ring Size field
Modifying vHBA Properties
Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Inventory.
Step 3
In the Inventory pane, click the Network Adapters tab.
Step 4
In the Adapter Cards area, select the adapter card.
If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the
Adapter Cards area.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
OL-23489-08 11
Managing Network Adapters
Modifying vHBA Properties