Filter
Top Products
Installing Adapter Firmware From a TFTP Server
Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Inventory.
Step 3
In the Inventory pane, click the Network Adapters tab.
Step 4
In the Adapter Cards area, select the adapter card.
If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the
Adapter Cards area.
Step 5
In the tabbed menu below the Adapter Cards area, click the General tab.
Step 6
In the Actions area of the General tab, click Install Firmware to open the Install Adapter Firmware dialog
box.
Step 7
In the Install Adapter Firmware dialog box, select Install from TFTP server, then click Next.
Step 8
In the Install Adapter Firmware dialog box, update the following fields:
DescriptionName
The IP address of the TFTP server on which the adapter configuration
file resides.
TFTP Server IP Address field
The path and filename of the configuration file on the TFTP server.Path and Filename field
Click this button if you want to specify a local path for the firmware
package.
Back button
Click this button to install the selected firmware package in the adapter's
backup memory slot.
Install Firmware button
Click this button to close the wizard without making any changes to the
firmware versions stored on the server.
Close button
Step 9
Click Install Firmware.
What to Do Next
To activate the new firmware, see Activating Adapter Firmware.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
38 OL-23489-08
Managing Network Adapters
Installing Adapter Firmware From a TFTP Server