Filter
Top Products
Step 5
In the tabbed menu below the Adapter Cards area, click the General tab.
Step 6
In the Actions area of the General tab, click Reset To Defaults and click OK to confirm.
Managing Adapter Firmware
Adapter Firmware
A Cisco UCS C-Series network adapter contains the following firmware components:
• Adapter firmware—The main operating firmware, consisting of an active and a backup image, can be
installed from the CIMC GUI or CLI interface or from the Host Upgrade Utility (HUU). You can upload
a firmware image from either a local file system or a TFTP server.
• Bootloader firmware—The bootloader firmware cannot be installed from the CIMC GUI or CLI. You
can install this firmware using the Host Upgrade Utility.
Installing Adapter Firmware From a Local File
Before You Begin
Store the adapter firmware file in the file system of the managing computer.
Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Inventory.
Step 3
In the Inventory pane, click the Network Adapters tab.
Step 4
In the Adapter Cards area, select the adapter card.
If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the
Adapter Cards area.
Step 5
In the tabbed menu below the Adapter Cards area, click the General tab.
Step 6
In the Actions area of the General tab, click Install Firmware to open the Install Adapter Firmware dialog
box.
Step 7
In the Install Adapter Firmware dialog box, select Install from local file, then click Next.
Step 8
Click Browse... and locate the adapter firmware file.
Step 9
Click Install Firmware.
What to Do Next
To activate the new firmware, see Activating Adapter Firmware.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
OL-23489-08 37
Managing Network Adapters
Managing Adapter Firmware