Filter
Top Products
Viewing Persistent Bindings
Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Inventory.
Step 3
In the Inventory pane, click the Network Adapters tab.
Step 4
In the Adapter Cards area, select the adapter card.
If the server is powered on, the resources of the selected adapter card appear in the tabbed menu below the
Adapter Cards area.
Step 5
In the tabbed menu below the Adapter Cards area, click the vHBAs tab.
Step 6
In the Host Fibre Channel Interfaces area, select a vHBA from the table.
Step 7
Click Persistent Bindings to open the Persistent Bindings dialog box for the selected vHBA.
Step 8
In the Persistent Bindings dialog box for the selected vHBA, review the following information:
DescriptionName
The unique identifier for the binding.Index column
The target World Wide Port Name with which the binding is associated.Target WWPN column
The host World Wide Port Name with which the binding is associated.Host WWPN column
The bus ID with which the binding is associated.Bus ID column
The target ID on the host system with which the binding is associated.Target ID column
Clears all unused bindings and resets the ones that are in use.Rebuild Persistent Bindings
button
Closes the dialog box and saves your changes.Close button
Step 9
Click Close.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
OL-23489-08 19
Managing Network Adapters
Viewing Persistent Bindings