Filter
Top Products
Step 10
In the Ethernet Interrupt area, review the information in the following fields:
DescriptionName
The number of interrupt resources allocated to this VM FEX.Interrupt Count field
The time CIMC waits between interrupts or the idle period that must
be encountered before an interrupt is sent.
Coalescing Time field
This can be one of the following:
• MIN—The system waits for the time specified in the Coalescing
Time field before sending another interrupt event.
• IDLE—The system does not send an interrupt until there is a
period of no activity lasting as least as long as the time specified
in the Coalescing Time field.
Coalescing Type field
The preferred driver interrupt mode. This can be one of the following:
• MSIx—Message Signaled Interrupts (MSI) with the optional
extension.
• MSI—MSI only.
• INTx—PCI INTx interrupts.
Interrupt Mode field
Step 11
In the Ethernet Receive Queue area, review the information in the following fields:
DescriptionName
The number of receive queue resources allocated to this VM FEX.Receive Queue Count field
The number of descriptors in each receive queue.Receive Queue Ring Size field
Step 12
In the Ethernet Transmit Queue area, review the information in the following fields:
DescriptionName
The number of transmit queue resources allocated to this VM FEX.Transmit Queue Count field
The number of descriptors in each transmit queue.Transmit Queue Ring Size field
Step 13
In the Completion Queue area, review the information in the following fields:
DescriptionName
The number of completion queue resources allocated to this VM FEX.Completion Queue Count field
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
OL-23489-08 33
Managing Network Adapters
Viewing Virtual FEX Properties