Filter
Top Products
DescriptionName
The number of times that the system tries to log in to the fabric after
the first failure.
To specify an unlimited number of retries, select the INFINITE radio
button. Otherwise select the second radio button and enter an integer
into the corresponding field.
FLOGI Retries field
The number of milliseconds that the system waits before it tries to log
in again.
Enter an integer between 1,000 and 255,000.
FLOGI Timeout field
Step 13
In the Fibre Channel Port PLOGI area, update the following fields:
DescriptionName
The number of times that the system tries to log in to a port after the
first failure.
Enter an integer between 0 and 255.
PLOGI Retries field
The number of milliseconds that the system waits before it tries to log
in again.
Enter an integer between 1,000 and 255,000.
PLOGI Timeout field
Step 14
In the SCSI I/O area, update the following fields:
DescriptionName
The number of SCSI I/O queue resources the system should allocate.
Enter an integer between 1 and 8.
CDB Transmit Queue Count
field
The number of descriptors in each SCSI I/O queue.
Enter an integer between 64 and 512.
CDB Work Queue Ring Size field
Step 15
In the Receive/Transmit Queues area, update the following fields:
DescriptionName
The number of descriptors in each transmit queue.
Enter an integer between 64 and 128.
FC Work Queue Ring Size field
The number of descriptors in each receive queue.
Enter an integer between 64 and 128.
FC Receive Queue Ring Size field
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.4
OL-23489-08 15
Managing Network Adapters
Modifying vHBA Properties