Filter
Top Products
To do this... Click this button:
Complete the choices in a dialog box and continue
Next
Return to a previous dialog box
Back
Exit without completing the installation
Cancel
Follow the instructions in the dialog boxes to select installation of Compaq TP
Desktop Connector.
The
setup
program checks whether there is sufficient disk storage, copies
appropriate files, and performs registry operations.
If
setup
finds that a requisite software product is not installed or that the
minimum version of a requisite product is not on the system, it displays a
Warning
box showing the product name and version. The installation might
continue after the warning or it might fail, depending on the prerequisite. If
the installation continues, you must install the prerequisite software before
you can actually use TP Desktop Connector software.
After you successfully install TP Desktop Connector software, follow the
instructions in Section 6.2 to set up the TPware environment.
6.2 After Installing TP Desktop Connector Software
This section describes some procedures you might want to perform after you
copy files from the OpenVMS system (see Section 3.2.2.1) or after the
setup
program finishes (see Section 6.1).
6.2.1 Setting Up the TPware Environment
Before developing TPware client applications, you must set up the environment
variables that TPware software requires. To do this, run the command file
installed by the
setup
program:
C:\TPware\stdl\bin\stdl_set_version.bat
Note
All examples show the default location. If you chose a different
destination while running
setup
, substitute your own drive and folder
for
C:\TPware
.
6–2 Installing TP Desktop Connector Software on Windows Operating Systems