Filter
Top Products
2. Execute it
3. Set up your system for the TPware environment
4. Set up the client services for your network transport
5. Transfer and execute a sample client archive
6. Run the sample to verify that the installation functions properly.
Sections 7.1.1 through 7.1.3 discuss the prerequisites and requirements
necessary before installing the TP Desktop Connector client services and
sample files. Installation instructions are organized by platform:
For this platform See . . .
Compaq OpenVMS systems Section 7.2
Tru64 UNIX systems Section 7.3
7.1.1 Software Prerequisites
The TP Desktop Connector Software Product Description (SPD) contains
information on software prerequisites for installing TP Desktop Connector
software.
7.1.2 Disk Space
Table 5–1 lists the disk space required for each of the desktop systems.
7.1.3 Resources
Before you start the installation procedure, obtain the following:
• DECnet node name (host name on TCP/IP) for the OpenVMS system on
which the TP Desktop Connector Gateway for ACMS is installed
• Valid account (user name and password) on the OpenVMS system on which
the TP Desktop Connector Gateway for ACMS is installed
• Directory of the network file transfer software in your directory search
path or on your CD-ROM
• Directory in which the TPware files reside on an OpenVMS system, or your
CD-ROM device (usually
E:\
)
• Directory in which to install the client services software
• Sufficient disk space, as shown in Table 5–1
• Host name for TCP/IP
7–2 Installing the TP Desktop Connector Client Services on Non-Windows Systems