Filter
Top Products
8.3.4 System Disk Backup
At the beginning of the installation, VMSINSTAL asks whether your system
disk is backed up. Compaq recommends that you always do a system disk
backup before installing new software on the operating system.
Use the backup procedures that are established at your site to do this backup.
For details on performing a system disk backup, see the section on the Backup
Utility in the OpenVMS documentation set.
8.3.5 Stopping the ACMS System and Gateway
If you have TPware components already installed and running, shut them
down. While logged in to the system under an account having the appropriate
privileges as described in Section 8.3.2, execute the following commands.
1. Stop the TP Desktop Connector Gateway for ACMS process. For example:
$ @SYS$STARTUP:ACMSDI$SHUTDOWN
$
2. If you have ACMS software already installed and running, shut it down.
Execute the following commands.
a. Stop the ACMS system. For example:
$ ACMS/STOP SYSTEM
.
.
.
$
b. Stop the ACMS controller. For example:
$ @SYS$STARTUP:ACMSTOP
.
.
.
$
8.3.6 Locating the Saveset Directory
If you have not already inserted the compact disk (CD) media in the CD drive,
do so now. To obtain the saveset for the gateway software from the CD-ROM,
complete these steps:
1. To determine whether the CD-ROM drive is already mounted (MOUNT
command), enter a command in the following format:
SHOW DEVICE device-name
8–4 Preparing to Install TP Desktop Connector Gateway for ACMS Software