Filter
Top Products
2. If the device is not mounted, enter a command in the following format:
MOUNT/OVERRIDE=ID device-name
For example:
$ MOUNT/OVERRIDE=ID DKA200:
3. Locate the distribution files. Use a DIRECTORY command in the following
format and specify the indicated directory specification and saveset name.
DIRECTORY device-name:[000000]ACMSDI*.*
The command lists the various backup savesets.
You supply this location when you invoke VMSINSTAL (see Section 9.2.1).
Preparing to Install TP Desktop Connector Gateway for ACMS Software 8–5