Filter
Top Products
• A prerequisite software version is incorrect.
• Quotas necessary for successful installation are insufficient.
• System parameter values for successful installation are insufficient.
• The OpenVMS help library is currently in use.
For descriptions of the error messages generated by these conditions, see
the OpenVMS documentation on system messages, recovery procedures,
and OpenVMS software installations. If you are notified that any of these
conditions exist, take the appropriate action as described in the message. (You
might need to change a system parameter or increase a quota value.) For
information on installation requirements, see Chapter 8.
If the installation of the component software completes satisfactorily, but a test
fails during the IVP, the IVP displays a message describing the failure and
suggests a course of action.
In most cases, the suggested course of action is to reinstall the gateway
software. If the IVP fails after you reinstall the gateway software, contact your
Compaq software specialist.
9.3.3 IVP Error Recovery
As the IVP executes, it checks the success of each test and operation it
performs. If any test or operation fails, the IVP displays a message describing
the failure and suggests a course of action.
Follow the suggested course of action and then restart the IVP as described in
Chapter 11. If you reinstall gateway software, the IVP runs automatically if
you answer YES to the IVP question. If you still cannot successfully run the
IVP, contact your Compaq software specialist.
9–10 Installing TP Desktop Connector Gateway for ACMS Software