Filter
Top Products
Preface
4 E-Class DPL Programmer’s Manual
• Interface Cable Connection: Connect the printer using the appropriate cable, as shown below.
• Front Panel Operation: The Front Panel consists of three lights and three dual-function buttons.
E4203, E4204 and E4304
• Normal Operating Mode: While in the normal operating mode, the printer’s buttons control
operations such as pause, feed, and cancel. The FEED button is used to clear a fault after its cause
has been removed. For testing and reset functions, combinations of the buttons must be
simultaneously pressed, as follows:
‘F’ Buttons Function(s)
+
Prints the Internal Test Label (see the Operator’s Manual for an
example).
+
Performs a warm reset, and then returns to the normal operating mode.
+
Prints the Database Configuration and Dot Pattern Labels.
+ +
Resets the printer to factory defaults: Turn the printer ‘off’, then press
and hold the buttons while turning the printer ‘on’. Continue to depress
the buttons until the Paused Indicator turns ‘off’.
For setup and calibration functions see the Operator’s Manual.