Filter
Top Products
Extended System Commands
E-Class DPL Programmer’s Manual 37
Where:
<CR>
- ASCII Carriage Return (0x0D) record delimiter.
aa-
cdd.ee
mm/dd/yy
- ASCII string sequence that represents the firmware version
number string.
iiii
- The number of 4KB blocks of DRAM memory.
vvvv
- The number of 4KB blocks of DRAM available for
configuration.
X:
- ASCII character identifying a DRAM module followed by an
ASCII colon (:). If no Internal Module is present, this field
and its associated legend will not appear.
xxxx
- The number of 4KB blocks of DRAM allocated as an Internal
Module.
ssss
- The number of 4 KB blocks of DRAM assigned to the smooth
scalable font processor cache.
LLLL
- The number of 4 KB blocks of DRAM assigned to label print
buffer.
wwww
- Current maximum printable label width (in 100
ths
of an inch
or millimeters).
gggg
- Current printable length (in 100
ths
of an inch or millimeters),
200 min. / 640 max.
oo
- Current label dimension unit’s designation: “IN” for inches or
“MM” for millimeters.
STX KR Reset Memory Configuration
This command resets the printer’s DRAM configuration to default settings, see <STX> KM.
Syntax:
<STX>KR<CR>
STX Kr Reset Resettable Counter
This command resets the internal counter. The internal counter requires the Real Time Clock option.
Syntax:
<STX>Kr<CR>
STX KS Memory Configuration, Scalable Font Cache
See <STX>K.
STX KW Memory Configuration, Printable Label Width
See <STX>K.