Filter
Top Products
E-Class DPL Programmer’s Manual 137
Appendix J
Module Identifiers, Field Limits, Print Resolutions, & Column Values
Module Identifer Memory Type
A DRAM (default size: 256 K Bytes)
BFlash
[1]
C Default (A or B Module, as assigned by <STX>X)
1
The availability/size of the Internal Flash Module is dependent upon the installed font option (expandable with the
Flash Memory Expansion Option) and available Flash memory; reference the Configuration Label, or following the
<STX>KC command the “INTERNAL FLASH MODULE PRESENT” message. The Flash memory has limited
writes and is intended for permanent (or semi-permanent) storage of downloaded images, fonts and label formats.
Table J-1: Module Identifiers
Printer Model Maximum Format Fields
[2]
Total Characters for all Fields
All E-Class Models 450 16,000
2
When the product of the number of fields and characters in each field exceeds the available printer memory (the
limiting factor), portions of the label may not print.
Table J-2 Field & Characters Limits
Print
Resolution
Dot Dimensions
(Nominal)
Maximum
Print Width
Maximum
“gggg” ValuePrinter
Model
DPI DPMM Inches Millimeters Dots Millimeters Inch Metric
E4203 / E4204
203 8.0 .0043 x .0052 .11 x .13 832 104.1
0410 1041
E4304 300 11.8 .0028 x .0056 .07 x .14 1248 105.7 0410 1041
Table J-3: Print Widths, Resolutions, and Record Column Field Values