Filter
Top Products
Extended System Commands
E-Class DPL Programmer’s Manual 33
TOF Bias / TOF Bias Reflective – Manual entry for the control of the minimum voltage required
to detect the label.
TOF Delta / TOF Delta Reflective – Manual entry for the control of the low level voltage
difference level to recognize a label “gap” or “mark.”
TOF Gain / TOF Gain Reflective – Manual entry for the control of the voltage to the LED
emitter of the Media Sensor.
STX KD Database Configuration
This command, stored in Flash memory and retained for future power-ups, controls the printer’s
environment and operates as a pseudo DIP switch.
Syntax:
<STX>KDwxyz<CR>
Where: w, x, y, and z are binary values with respective bit settings as defined
in the following tables. (Bit 0 is least significant.)
Sample:
<STX>KD@H@@<CR>
The sample configures the printer as follows:
@ Sets the communications to 9600 baud with an 8-bit word and no parity;
H Selects direct thermal printing, standard control characters, and enables the media cutter;
@ Selects gap sensing;
@ Is the default setting (items saved for future expansion).
Note: The Ignore Host Distance setting (see below) allows the printer to disregard <STX>O and
<STX>f commands; a feature provided for host system software that sends these
commands with values that may be inappropriate for the printer and result in incorrect start
of print and present distances. Use the <STX>KD command or the Setup Menu to enable
this feature.