Filter
Top Products
Appendix L
142 E-Class DPL Programmer’s Manual
Commands by Function (continued)
Function Command(s)
Select Mirror Mode M
Select Reflective Sensor <STX>r
Send ASCII Status String <SOH>A
Send Batch Quantity <SOH>E
Send Status Byte <SOH>F
Set Backfeed Speed pa
Set Column Offset Amount Cnnnn
Set Configuration <STX>Kc
Set Continuous Paper Length <STX>cnnnn
Set Count By Amount ^nn
Set Cut By Amount :nnnn, or cnn
Set Default Module <STX>Xm
Set Dot Size Height and Width Dwh
Set Double Buffer Mode <STX>d
Set Feed Speed <STX>Sa
Set Field Data Line Terminator Tnn
Set Form Stop Position (Backfeed Command) <STX>fnnn
Set Format Attribute An
Set Imperial (Inch) Mode <STX>n, or n
Set Maximum Label Length <STX>Mnnnn
Set Metric Mode <STX>m, or m
Set Pause for Each Label <STX>J
Set Present Distance <STX>Kfnnnn
Set Present Speed fa
Set Print Quantity Qnnnnn
Set Print Speed Pa
Set Quantity for Stored Labels <STX>Ennnn
Set Row Offset Amount Rnnnn
Set Single Buffer Mode <STX>s
Set Slew Speed Sa
Set Start of Print Position <STX>Onnnn
Set Time and Date <STX>AwMMddyearhhmmjjj
Software Switch Settings <STX>Vn
SOH Shutdown <SOH>D
Stop / Cancel <SOH>C
Store Label in Module smname
Symbol Set Select ySaa
Terminate Label-Formatting Mode and Print E
Terminate Label-Formatting Mode without Printing X
Test Flash Memory Module <STX>w
Test DRAM Memory Module <STX>t
Test RS-232 Port <STX>k
Toggle Pause <SOH>B
Update System Database with Current Database <SOH>U
Zero (Ø) Conversion to “0” z
Table L-1