Filter
Top Products
Extended System Commands
36 E-Class DPL Programmer’s Manual
STX Kf Set Present Distance
This command specifies an additional amount to advance the label after printing. This command has
the same effect as the <STX>f command, but specifies a distance to advance relative to the start of
print (<STX>O command) of the next label.
Syntax:
<STX>Kfnnnn<CR>
Where:
nnnn
- A four-digit present distance in inches/100 or mm/10.
Sample:
<STX>Kf0100
The sample represents a one-inch label advance unless in metric mode (see <STX>m).
STX KQ Query Memory Configuration
This command causes the printer to transmit DRAM memory configuration to the host device
regarding the total amount installed, the amount available for configuration, and the amount
currently assigned to specific functions or entities.
Syntax:
<STX>KQ<CR>
Printer response format:
INTERNAL MEMORY<CR>
VER: aa-cdd.ee mm/dd/yy<CR>
INSTALLED: iiii<CR>
AVAILABLE: vvvv<CR>
MODULE: X:xxxx<CR>
SCALABLE: ssss<CR>
LABEL MEM: LLLL<CR>
LABEL SIZE: wwww:gggg:oo<CR>