Filter
Top Products
20 Installing and Configuring Dell Wyse Configuration Manager (WCM)
9
Launch IIS Manager, select
Default Web Site,
right click and select
New
Virtual Directory
on the menu.
a
In the
Virtual Directory Creation Wizard
, enter
WCM
under
Alias
and click
Next
.
b
Navigate to the physical location of the Wyse folder structure that you
created in step 8. For example,
C:\inetpub\ftproot\.
c
Click
Next
.
d
Enter the type of access to the folder such as
Read
,
Write
,
Browse
etc.
e
Click
Next
to complete the wizard. The virtual directory is created
with the Wyse folder structure.
10
Verify the FTP virtual directory structure under
FTP Sites
Default FTP
Site
. It is automatically created.
a
Right-click
Default FTP Site
and select
Properties
on the menu.
b
In the
Default FTP Site Properties
window, click the
Home Directory
tab to verify the virtual directory.
11
Set up the ports for FTP, HTTP, and HTTPS.
Setting up the FTP port on a Windows 2003 Server
1
Launch IIS Manager, right click
Default FTP
.
2
Select
New
FTP Site
on the menu. In the
FTP Site Creation Wizard
click
Next.
3
Ty pe
WCM
in
Description,
and click
Next.
4
The default
Port
number is displayed as
21
. Leave the default port
number.
5
Under
Enter the IP address to use for this FTP site
leave the default value
and click
Next.
6
Leave the default settings for
FTP User Isolation
and click
Next
.
7
Browse to the FTP Directory (
C:\inetpub\ftproot\
) and click
Next.
8
Enter access to the FTP Directory and click
Next
to complete the setup
.
WCM_AdminGuide.book Page 20 Thursday, October 31, 2013 4:39 PM