Filter
Top Products
Using the Dell Wyse Configuration Manager (WCM) GUI Application 59
Ethernet
Table 3-11. Ethernet Details
Ethernet Setting Name Description Expected Value
DHCP Settings
Enable DHCP To assign an IP address from
a DHCP server.
If set to False, you must
enter a static IP address.
True or False.
Static IP Settings
IP Address A specific or static IP
address for the thin client
device. This is mandatory if
you set the Enable DHCP
to False.
Enter an IP address.
Gateway Address The IP address of the
routing gateway for the thin
client device.
Enter the IP address.
Subnet Address The subnet address for the
static IP address of the thin
client device.
Enter the subnet address.
DNS Addresses
DNS1 Address IP address of the primary
DNS server of the thin client
device.
Enter the IP of the primary
DNS server.
DNS2 Address IP address of the secondary
DNS server of the thin client
device.
Enter the IP of the secondary
DNS server.
WINS Addresses
WINS1 Address IP address of the primary
WINS server of the thin
client device.
Enter the IP of the primary
WINS server.
WINS2 Address IP address of the secondary
WINS server of the thin
client device.
Enter the IP of the secondary
WINS server.
WCM_AdminGuide.book Page 59 Thursday, October 31, 2013 4:39 PM