Filter
Top Products
Installing and Configuring Dell Wyse Configuration Manager (WCM) 35
4
Click
Add
to add an option in the
Option Type
window.
5
Add the following details one at a time in the
Option Type
window:
6
On the
Predefined Options and Values
screen, scroll down to verify that
the options have been added.
7
Select option tag
6
and enter the IP address of the DNS Server or the
name of the DNS Server.
8
Select option tag
183
, and enter the protocol you will be using on your
server.
9
Select option tag
195
and enter the IP address of your FTP, HTTP or
HTTPS server that contains the WCM configuration files and press
OK.
10
Select option tag
196
and enter the string “/ ” (forward slash) and press
OK. This sets the default path to ftproot/wyse/wes7 directory if you are
using FTP as the protocol or webroot/wyse/wes7 if using HTTP or HTTPS
as the protocol.
11
Select option tag
184
and enter the username to use when authenticating
to the server specified in step 9 (option tag 195). If the server allows
Anonymous log in, you can enter the value
Anonymous
.
12
Select option tag
185
and enter the password to use when authenticating
to the server specified in step 9 (option tag 195). If the server allows
Anonymous log in, leave this field blank.
Table 2-2. DHCP Options
Name Data Type Code Description
DNS Server String 6 DNS Server
WCM Protocol String 183 WCM Protocol
WCM Server
Username
String 184 WCM Server Username
WCM Server
Password
String 185 WCM Server Password
WCM Server String 195 WCM Server
WCM Path String 196 WCM Path
WCM_AdminGuide.book Page 35 Thursday, October 31, 2013 4:39 PM