Filter
Top Products
Using the Dell Wyse Configuration Manager (WCM) GUI Application 69
Agent Settings
You can use this option in the Options menu to configure your default client
agent settings. These settings are required if you are using Dell Wyse Device
Manager (WDM) to push the configuration files to your thin clients.
NOTE: You must configure the WDM Server if you want to use it to push the
configuration files to the thin clients. For more information, see
Configuring the Dell
Wyse Device Manager (WDM) Server
.
To configure Agent Settings:
1
Log in to the Repository Server as Administrator and launch the WCM
Application GUI.
2
Select
Options
Agent Settings
on the menu.
3
In the
Agent Settings
dialog box, enter the following:
–
Protocol
— Select an option from the drop-down box.
–
Server IP
— Enter the IP address of the Repository Server.
–Port —
This is entered by default based on the protocol you choose.
–
Path
— Enter the path of the configuration file. This is optional.
– User Name —
Enter the server username. This is optional.
–Password
—
Enter the server password. This is optional.
4
Select one or more of the following options:
–
Import Configuration on Every Boot
— if you want to download the
configuration file everytime the thin client system reboots.
–
Use WDM
— if you want to use the WDM server to push the
configuration file to the thin client.
–
Enable Balloon Tips
— if you want a balloon tip to indicate the status
of download on the thin clients.
5
Click
Apply
to save your settings.
WCM_AdminGuide.book Page 69 Thursday, October 31, 2013 4:39 PM