Filter
Top Products
36 Installing and Configuring Dell Wyse Configuration Manager (WCM)
13
Add the options to the DHCP scope. Navigate back to
DHCP
in the
Computer Management screen, right click
Scope Options
and select
Configure Options
.
14
Ensure to select options 183, 195, and 196. Press
OK
to save and exit.
Configuring DHCP Options on a Windows 2008 Server
1
Launch
Server Manager
from the
Start
menu.
2
Under
Roles
, expand the
DHCP Server
, select your server and expand it.
3
Select
IPv4
and expand it.
4
Right click
Scope Options
and select
Configure Options
. The Scope
Options window is displayed.
5
Select option tag
6
and enter the IP address of the DNS Server or the
name of the DNS Server.
6
Select option tag
183
, and enter the protocol that you want to use on your
server.
7
Select option tag
195
and enter the IP address of your FTP, HTTP or
HTTPS server that contains the WCM configuration files and click
OK.
8
Select option tag
196
and enter the string “/ ” (forward slash) and click
OK
. This sets the default path to the
ftproot/wyse/wes7
directory if using
FTP as the protocol or
webroot/wyse/wes7
if using HTTP or HTTPS as the
protocol.
9
Select option tag
184
and enter the username to use when authenticating
to the server specified in step 9 (option tag 195). If the server allows
Anonymous log in, enter the value
Anonymous
.
10
Select option tag
185
and enter the password to use when authenticating
to the server specified in step 9 (option tag 195). If the server allows
Anonymous log in, leave this field blank.
11
Click
OK.
Configuring the WCM Thin Client Systems
To manually configure the DHCP options on thin client systems:
1
Log in as Administrator into the thin client systems and launch the WCM
from the Control Panel.
WCM_AdminGuide.book Page 36 Thursday, October 31, 2013 4:39 PM