Filter
Top Products
Understanding the Printer Menus 221
Protocol
Purpose:
To enable or disable each protocol.
The change becomes effective after the
printer is turned off and then on.
Va lue s:
IPv4 Get IP
Address
Panel Enables the IP address entered on the operator
panel.
AutoIP* Automatically sets the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
DHCP Uses DHCP to set the IP address.
IP Address Manually sets the IP address allocated to the printer.
Subnet Mask Manually sets the subnet mask.
Gateway Address Manually sets the gateway address.
LPD Enable* Enables the LPD port.
Disable Disables the LPD port.
Port9100 Enable* Enables the Port9100 port.
Disable Disables the Port9100 port.
WSD Enable* Enables the WSD port.
Disable Disables the WSD port.
SNMP UDP Enable* Enables the UDP port.
Disable Disables the UDP port.
E-Mail Alert Enable* Enables the E-mail Alert feature.
Disable Disables the E-mail Alert feature.
EWS Enable* Enables an access to Dell Printer Configuration
Web Tool embedded in the printer.
Disable Disables an access to Dell Printer Configuration
Web Tool embedded in the printer.
Bonjour (mDNS) Enable* Enables the Bonjour (mDNS).
Disable Disables the Bonjour (mDNS).