Filter
Top Products
40 Setting the IP Address
5
Press the button until
TCP/IP
appears, and then press the button.
6
Press the button until
IPv4
appears, and then press the button.
7
Ensure that
Get IP Address
appears, and then press the button.
8
Ensure that
Panel
appears, and then press the button.
9
Press the button and ensure that
Get IP Address
appears.
10
Press the button until
IP Address
appears, and then press the
button.
The cursor is located at the first digit of the IP address.
11
Press the or button to enter the numbers for the IP address.
12
Press the
button.
The next digit is selected.
13
Repeat step 11 and step 12 to enter all the digits in the IP address, and
then press the button.
14
Press the button and ensure that
IP Address
appears.
15
Press the button until
Subnet Mask
appears, and then press the
button.
The cursor is located at the first digit of the subnet mask.
16
Press the or the button to enter the numbers for the subnet mask.
17
Press the button.
The next digit is selected.
18
Repeat step 16 and step 17 and set subnet mask, and then press the
button.
19
Press the button and ensure that
Subnet Mask
appears.
20
Press the button until
Gateway Address
appears, and then press
the button.
The cursor is located at the first digit of the gateway address.
21
Press the or button to enter the numbers for the gateway address.
22
Press the button.
The next digit is selected.
23
Repeat step 21 and step 22 to set gateway address, and then press the
button.