Filter
Top Products
Installing Printer Drivers on Computers Running Windows 91
f
Select
Connect Anyway
in the warning dialog box indicating you are
entering an unsecured area.
g
Click
Close
in the dialog box after confirming the connection is a
success.
For Windows Server 2008:
a
Open
Control Panel
.
b
Select
Network and Sharing Center
.
c
Select
Connect to a network
.
d
Select the network, and then click
Connect
.
e
Select
Connect Anyway
in the warning dialog box indicating you are
entering an unsecured area.
f
Click
Close
in the dialog box after confirming the connection is a
success.
For Windows Server 2008 R2 and Windows 7:
a
Open
Control Panel
.
b
Select
Network and Internet
.
c
Select
Network and Sharing Center
.
d
Select
Connect to a network
.
e
Select the network, and then click
Connect
.
f
Enter the
Security key
and click
OK
, if necessary.
Setting Up for Shared Printing
You can share your new printer on the network using the
Drivers and Utilities
CD
that shipped with your printer, or using Windows Point and Print or peer-
to-peer method. However, if you use either of the Microsoft
®
methods you
will not get features such as the status monitor and other printer utilities,
which will get installed with the
Drivers and Utilities CD
.
If you want to use the printer on a network, share the printer and install its
drivers on all the computers on the network.
NOTE: You need to purchase a Ethernet cable separately for shared printing.