Filter
Top Products
222 Understanding the Printer Menus
Purpose:
To block data received from certain IP addresses through the wired or wireless
network. You can set up to five IP addresses. The change becomes effective
after the printer is turned off and then on.
Values :
NOTE: This item is only available for LPD or Port9100.
Reset LAN
Purpose:
To initialize wired network data stored in NVM (non-volatile memory). After
executing this function and rebooting the printer, all wired network settings
are reset to their default values.
Wireless LAN
Purpose:
To enable the wireless connection.
LLTD Disable* Disables the LLTD.
Enable Enables the LLTD.
No. n/
Address (n
is 1-5.)
Sets the IP address for Filter
n
.
No. n/Mask
(n is 1-5.)
Sets the address mask for Filter
n
.
No. n/
Mode (n is
1-5.)
Off* Disables the feature for Filter
n
.
Accept Accepts an access from the specified IP address.
Reject Rejects an access from the specified IP address.
Enable* Enables the wireless connection.
Disable Disables the wireless connection.