Filter
Top Products
NIC Indicator Codes
Each NIC on the back panel has an indicator that provides information on network activity and link status (see Figure3-6). Table3-7 lists the NIC indicator
codes on the back panel.
The front panel has a link indicator for each NIC (see Figure3-2). Each indicator signifies whether the corresponding NIC is connected to a valid link partner on
the network.
Figure 3-6. NIC Indicators
Cooling Fan Indicator Codes
Each individual fan has a status indicator on the system board adjacent to the respective fan's connector (see Figure3-7). To locate the fan connectors on the
system board, see Figure5-3. Table3-8 lists the fan indicator codes.
Figure 3-7. Cooling Fan Indicators
LCD Status Messages
The system's bezel indictor can signify when the system is operating correctly or when the system needs attention (see Figure3-1). When the bezel indicator
signifies an error condition, remove the bezel to see further information provided by the status LCD.
The LCD can display two lines of alphanumeric characters. The display codes are presented in two color combinations:
l White characters on a blue background — Information only; no action is required.
l Amber characters on a black background — The system needs attention.
Table3-9 lists the LCD status messages that can occur and the probable cause for each message. The LCD messages refer to events recorded in the SEL. For
information on the SEL and configuring system management settings, see the systems management software documentation.
Predicted failure for the drive
Blinks green, then amber, and then off, repeating this sequence every two seconds
NOTE: The "drive busy" indicator signifies whether the hard drive is active on the SCSI bus. This indicator is controlled by the hard drive.
Table 3-7.NICIndicatorCodes
Indicator
Indicator Code
Link and activity indicators are off
The NIC is not connected to the network.
Link indicator is green
The NIC is connected to a valid link partner on the network.
Activity indicator is amber blinking
Network data is being sent or received.
Table 3-8.CoolingFanIndicatorCodes
Indicator
Indicator Code
Off
The fan is not required.
Green
The fan is functioning properly.
Amber blinking
The fan is malfunctioning.
Table 3-9.LCDStatusMessages