Filter
Top Products
Remote Console Switch Software Basic Operations 88
3
Click the
RDP
tab, as appropriate.
4
For servers only, in the IP Address field, enter an IP address in dot notation
or a 1-128 character domain name. Spaces are not allowed. Duplicate
addresses are allowed. You may use an IPv4 or an IPv6 address.
5
In the Port field, enter a port number in the range 23-65535. If blank, port
23 is used.
6
Mark to enable or clear to disable the
Use Default
checkbox. When this
setting is enabled, the default global setting specified in
Options
will be
used and all other portions of the
Application to Launch
area are disabled.
7
Enter the directory path and name or click the
Browse
button to locate the
path and name.
8
Enter command-line arguments in the box below the path and name.
- or -
To insert a predefined macro at the cursor location in the command-line,
click the
Insert Macro
list box and select a macro from the drop-down
menu. The Remote Console Switch Software will automatically replace
these variables when the application runs.
9
Enable/disable the
Launch in command window
checkbox. When
enabled, the user-specified RDP application will be launched from within
an OS command window.
Figure 4-15. Server RDP Properties tab